ALIPLAST MC WALL
ALIPLAST MC WALL
ALIPLAST MC WALL
ALIPLAST MC WALL

TECHNICAL SPECIFICATION

system material depth mullion depth transom glazing range mullions rigidity transom rigidity
MC WALL aluminium 10-326 mm 10-294 mm 4-59 mm from 2,5-4092 cm4* from 0,9 to 1831,1*

 

PERFORMANCE
system thermal insulation Uf* air permeability windload resistance watertightness
MC WALL Uf from 0,84 W/m2K Class AE1500; EN 12152  2600Pa – 3900Pa; EN 13116 Class RE1950; EN 12154

 

Aliplast MC Wall

Modern Facade System

    • Curtain wall system for traditional and semi-structural facades with thermal interruption.
    • Rapid construction for straight facade elements
    • Light faceted (“formed”) curtain walls can be constructed with screw connections for the rows.
    • The whole can be finished on the outside with various decorative frames.
    • In addition to the traditional facades with horizontal and vertical protruding decorative frames, this series can be used to create a semi-structural facade where the outer part of the facade shows only vertically protruding roof covers.
    • Post width: 55 mm.
    • Posts and rows of different depths for recessing.
    • Fillings: carried out with extruded EDPM rubber and co-extruded terminal strips.
  • a system used to design modern curtain walls. The system is a basis for facade structures: MC Passive, MC Passive+, MC Glass and MC Fire, MC Glass Fire (a solution for fire protection). The MC Wall system offers many possibilities
    of creating the installation. The system offers structures to be opened on the facade: parallel windows (MC PW) and roof windows (MC RW).
  • mullion-transom visual width: 55 mm
  • the curtain wall in the MC Wall system consists of mullions and transoms fastened by stainless steel bolts. There are 2 x ø 6 stainless steel fasteners per joint; the fasteners ensure very high load capacity of the mullion-transom connection, both in the wind pressure plane and the infill load plane. The solution does not prevent using traditional transom brackets or fastening transoms only with screws attached from the face side
  • a wide range of mullions and transoms suitable for static requirements
  • the insulators can be built accordingly to the infill thickness
  • application of vapour-proof and breather membranes on the perimeter of the
  • facade is easier, in accordance with new guidelines for installation of aluminium structures
  • a wide range of decorative cover caps makes it possible to obtain varied visual effects on the curtain wall
  • a wide range of decorative cover caps makes it possible to obtain varied visual effects on the curtain wall
  • the option of bending profiles (detailed specification of profiles and detailed technical parameters of profile bending process are available in the customer area of the website www.aliplast.pl)
  • a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, bi-colour.